RELATED BUSINESS： 1.Electrical：power switches, relays, adaptor, battery shells, timer antenna connector, switch & plug.
2.Stationery：sign pen, pencil box, document holder, stafler, pencil sharper.
3.Electronic：audio housing, cassette shell, calculator, electronic watch, etc.
4.Toy：water gum, remote control toy, doll, electronic games.
5.Homeappliances：washer tub, TV housing, portable flu-lighter, steam iron, etc.
6.Cosmetic：powder container, creamer container, sharper shell, plastic soft tube, etc.
7.General：plastic gas lighter, floating ball, pot sprayer, shower, necklace, plastic brush,key chain, umbrella handle, nylon belt and any thermo-plastic parts.
8.Communication：rear view mirror, front corner lamp, rear tail light gas filter reflector.
9. Food service：thermo bottle and pot, fry pork container, sealing container, etc.
FEATURES OF FUNCTION： ■ Part assemblies are cycled quickly because the energy transferred to the joint and release as heatoccurs very rapidly and is confined to the immediate joint area.
■It is a fast, clean, efficient, and repeatable process strong, integral bonds while consuming very little energy.
■ The rapid dissipation of heat makes this process considerably faster than other methods of assembly.
■ No solvents, adhesives, mechanical fasteners or external heat are required .
■ Difficult materials can be assembled ultrasonically.
■ Finished assemblies are strong and clean .
ADVANTAGES OF ULTRASONIC WELDERS： ◆Provided with circuit breakers and error display, easy for maintenance and ideal for application.In case of any failure of an electronic component , the ERROR LED will be lit accompanying with a buzzer sound to notice the operator to check the failure. If necessary , just replace a new fuse or an IC board, the welder can be fixed within minutes.
◆ Equipped with a Sonic Regulator for easy adjustment of the best ready-to-use condition. An operator can easily adjust the best ready-to-use condition of the ultrasonic welder by means of the Sonic Regulator. If the ultrasonic frequency is not properly adjusted, the output of the welding energy will be insufficient and will lead a failure.
◆ Equipped with high precision and stable roller guide rails. More stable than ball-screwed or ball Bearing guide rails. No risk of deflection or vibration problem during down stroke movement.The most suitable unit for welding the non-flat and/or curved surfaces.
◆ Stop oscillation at the preset position. The welding time can be precisely preset to guarantee the consistency of the end products. Due to the variable welding conditions, such as different thickness, molding cavities, pressure variations and power variations etc., taking the advantagesof this special function, the height of the work piece to be welded can be precisely controlled.
◆ Special design of circuits, high output and long service life. It can complete the welding within seconds.
◆ Large stable machine bed, equipped with T-slots easy for fixing the bottom die using nuts. Easy For fixing the dies. The bottom die can be fixed and installed within angles of 360°.
◆ Digital control by optical device, digital controllable accuracy 0.01mm. The oscillation starting point and stop position can be precisely preset. The preset values, actual working values, welding time and holding time etc. parameters can be digitally displayed. For any undesirable welding height, the preset values can be digitally modified. It is different from the traditional adjustment method, which uses an adjusting screw.
TECHNICAL DATA： Power Source：220V, Single Phase, 50 / 60 Hz, Air Pressure：0.5 ~ 8 kg./ cm2
ModelNo.
Frequency
Output
A
Welding(ABS)
Dimension(cm)
Net Weight(kg.)
Working Height
STP-2013P
20 KHz
1300 W
10
60Ø
80 X 60 X 40
90
0 ~320mm
STP-2015P
20 KHz
1500W
10
80Ø
80 X 60 X 40
90
0 ~320mm
STP-2020P
20 KHz
2000W
12
100Ø
80 X 60 X 40
100
0 ~320mm
STP- 2025P
20 KHz
2500W
12
120Ø
80 X 60 X 40
100
0 ~320mm
STP-1518P
15 KHz
1800W
10
150Ø
80 X 60 X 40
110
0 ~320mm
STP-1522P
15 KHz
2200W
12
170Ø
80 X 60 X 40
110
0 ~320mm
STP-1528P
15 KHz
2800W
12
180Ø
80 X 60 X 40
120
0 ~320mm
STP-1532HP
15 KHz
3200W
15
200Ø
110 X 90 X 210
250
0 ~320mm
STP-1536HP
15 KHz
3600W
15
230Ø
110 X 90 X 210
250
0 ~320mm
STP-1542HP
15 KHz
4200W
15
250Ø
110 X 90 X 210
250
0 ~320mm
We reserve the right for any alteration without prior notice. Optional floor type machine frame is available for all of the models mentioned above upon request.
ULTRASONIC TOOLING DESIGNED & MADE FOR CUSTOMER`S DEMAND ：
Ultrasonic tooling (i.e., horns and fixtures)is a critical element in the plastics assembly process. Each ultrasonic horn and fixture must be designed to accommodate the requirements of a particular application.
